The plant model
The plant model
How Shop Floor describes your plant: locations, areas and lines, workcenter types, plant maps, the facility graph and shifts.
Boards are only as good as the plant model behind them. A machine that is not on a line is missing from every line-filtered board. A machine without a type is not measured. A plant without a map shows its machines as a list. The screens below are in the Plant group of the Shop Floor Setup menu.
Permissions: Editing the plant model needs DataMagik - Shop Floor Admin. Shop Floor Viewers and Maintenance users see the result on the boards. DataMagik - Builder does not give access to Shop Floor.
Locations
A location is one plant or warehouse inside your company: one Plex PCN, with its credentials, timezone and (for machine data) its connector group. Every other setup screen asks which location it is working on, so add locations first. A location is not a Site. A Site is a separate company under an enterprise parent, with its own users and setup, and each Site has its own locations. See Getting started for each field.
Workcenters
Workcenters are your Plex workcenters, brought in from Plex for each location. You cannot add or delete them in DataMagik, because a workcenter that Plex does not know about could never be joined to Plex data or written back. What you own is each workcenter's type and its line.
Workcenter types
Workcenter types (/shop-floor/settings/classify) says what each machine is, in your plant's own words. The types come from the workcenter types you use in Plex, such as Press, Staker or Assembly. Each type can be mapped to a standard type, the kind of machine it is (for example Press, Weld Station or Assembly). The standard decides which tags its machines must provide, what a custom app may ask them for, and what they are measured against.
- The Workcenters list shows each machine, What Plex says about it, its Type and what that type Requires. Each machine is marked Classified, Suggested, not yet accepted or Nothing suggested.
- See what Plex suggests runs guided setup. It proposes one type for each Plex workcenter type your machines use, read from Plex data source 805 (Workcenters_Get_All). Each proposed type has a Standard type picker. Guided setup fills it in when the type's name, or most of its machines' names, make the kind of machine clear, and says what it went by. Change it if it is wrong, tick the types you want, and press Apply the ticked types. A type you have already saved is proposed exactly as you saved it.
- If the page says Plex's workcenter types could not be read, data source 805 is not granted to the location's Plex API user. Check it on Data Source Enablement.
- Under The type vocabulary you can rename a type, change its Standard type and choose its Required tags. Picking a standard ticks that standard's tags, and you can still change them. Tick none if the type groups machines but is not measured. A type's code cannot be changed, because machines and automations match on it.
- Choosing a type for a machine by hand pins it. Guided setup never changes a pinned machine.
Areas and lines
Areas and lines (/shop-floor/settings/lines) groups the plant so a board can cover part of it instead of all of it. A line belongs to an area.
- Choose the location, then Add an area (for example "Press shop").
- Press New line in that area and name it.
- Under Machines not on a line, use Line for beside each machine to move it onto a line.
Machines that are not on a line appear on every unfiltered board and on none of the filtered ones. A line with no machines is marked as showing nothing when a board is filtered by it. You can rename or delete areas and lines. Deleting a line that has machines on it sends those machines back to Machines not on a line, and the confirmation tells you how many.
Plant maps
Plant maps (/shop-floor/settings/plant-maps) draws where machines are on the floor. The Plant Overview board and the Floor Console use these maps. Until a map exists, the Plant Overview shows machines as a list grouped by line.
- Press + New map and give it a Map name.
- Optionally press Upload floor plan, or choose a Blank or Grid background.
- Drag machines from the tray onto the map. You can also use Find a machine, pick one and press Place.
- Use Add zone and drag across the map to draw zones around groups of machines.
- Choose how machines are labeled (Names, Codes or None) and press Save map.
Make this the console's map picks the map the Floor Console shows. The arrow keys move the selected zone or machine, Delete removes it, and plus and minus zoom.
The same page holds Plant Overview dashboards. Press + New dashboard to choose the Maps, in order it pages through, how often it moves on (Page between maps every), the Panels beside the map, in order, the theme, and whether to Show PA alerts on this dashboard. Preview on a TV shows how a 1920×1080 screen lays it out.
Facility graph
Facility graph (/shop-floor/settings/facility) is for plants that run vehicles such as AGVs. On top of a plant map, you draw where vehicles can go. Routes and travel times come from this drawing.
- Plant map: choose a map, or upload one (PNG, JPG or SVG, up to 8 MB).
- Set the scale: click two points whose real distance you know, such as two columns, and enter the distance in meters or feet.
- Draw stations and lanes: add stations to pick up, drop, charge and park, add junctions, draw the lanes between them, and draw zones to avoid or slow down in.
Check a route shows the quickest saved route between two points for a vehicle width class (Narrow, Standard or Wide).
Shifts
Shifts are not drawn in DataMagik. They come from your Plex shift calendar, including breaks, and are read for each location. They decide how Hour by Hour splits a day, what the Shift Handover summarizes, and which shift a production hour belongs to. If Hour by Hour finds no shift on a date, pick another date or check which shift cycle that workcenter is on in Plex. The Plant Readiness report grades Shifts, breaks and the report-date basis, so run it if shift figures look wrong.